Plan service, schedule resources, control live headway, and protect fleet readiness. From timetable design to final passenger stop.
Book a demoThe Tripqentra AI Dashboard serves as the operational nerve center of your passenger transportation network. Powered by real-time predictive models that continuously reconcile published timetables, live CAD/AVL telemetry, driver attendance, and fleet readiness, it eliminates blind spots across revenue service. Rather than reacting to bus bunching or missed pull-outs after service breaks down, leadership gains proactive AI intelligence that forecasts bottlenecks and prescribes interventions before riders experience delays.
Continuous Operational Intelligence — The dashboard’s predictive engine continuously compares timetable plans with live CAD/AVL telemetry, driver attendance, and vehicle readiness 24/7. When risk is detected on any route or block, the system simulates short-turns, holds, and spare insertions—protecting service reliability before riders experience delays.
Operations move differently across every environment — with complex transit corridors, heavy vehicle fleets, live telemetry sensors, and critical maintenance cycles. The Nestack enterprise suite is purpose-built to give your teams shared, real-time operational intelligence.
8 operational views, connected by the transit and operational information your teams already handle.
Plan transit routes, stops, headways, and service spans with real-time runtime analysis and GTFS schedule synchronization before publishing public timetables.
Validate ADA eligibility, recurring subscription rides, and private charter requests. Recommend feasible pickup windows and calculate automated charter proposals.
Convert scheduled service plans into executable vehicle blocks, operator run cuts, and garage pull-out rosters while enforcing collective bargaining (CBA) work rules.
Match extra-board operators, verify CDL credentials and medical fitness, assign serviceable buses, and monitor pull-out countdowns to prevent uncovered runs.
Monitor real-time CAD/AVL positions and GTFS-RT telemetry. Intervene with holds, short-turns, expresses, and spare bus injections before delays cascade across corridors.
Combine J1939 CAN-bus telemetry, diagnostic trouble codes (DTC), and inspection records to calculate failure risk weighted by peak service consequence.
Audit contactless taps, smart-card transactions, mobile ticketing, cashbox vaults, and contract subsidies. Detect revenue leakage across routes and service periods.
Automate Safety Management System (SMS) records, Transit Asset Management (TAM) condition ratings, and National Transit Database (NTD) reporting forms.
Synchronized transit tracking from depot pull-out to passenger delivery.
Service Planning establishes network geometry, stop definitions, running times, and headway frequencies. Tripqentra AI synchronizes schedule adjustments into valid GTFS datasets before public publishing.
Scheduling transforms timetable trips into efficient vehicle blocks and operator run cuts. The optimization engine respects union CBA rules, relief points, and required rest intervals to minimize synthetic deadhead.
Dispatch ensures pre-trip pull-outs leave on time by matching extra-board drivers and active fleet. Once in revenue service, live CAD/AVL telemetry detects bunching and recommends holds or short-turns.
Predictive models evaluate J1939 telemetry to catch vehicle failures before pull-out, while the compliance workspace continuously prepares audit-ready NTD forms, TAM condition scores, and PTASP safety logs.
Use a platform designed to harness the best intelligence available for the work in front of you. Tripqentra AI routes each transit operations step to the model family that fits — headway anomaly scoring, combinatorial run cutting, multimodal DVIR extraction, or a specialist regulatory fine-tune — not whichever model shipped inside your last legacy software purchase.
One model, one pass, and no step you can point somewhere else. You work within its limits.
ADA passenger qualification records, mobility device requirements, and charter agreements extracted with source citations.
Simulate spot headway adjustments across transit corridors while enforcing minimum rest intervals and vehicle battery/fuel limits.
Cross-reference scheduled operator runs against ATU/TWU union work rules and fatigue thresholds to catch compliance exposure before pull-out.
Analyze driver pre-trip inspection notes, pushout window checks, and emergency door photos directly against FMCSA Part 396 mandates.
Calculate optimal vehicle blocks and driver runs between central depots, relief points, and terminals within 15-minute dispatch windows.
Model reasoning chain, dispatcher approvals, and daily service records sealed into immutable FTA audit logs.
Note: Model names and marks belong to their respective owners. No endorsement or partnership implied. Supported routing is configured during onboarding.
Relevant standards can inform your review procedures. Software supports records and workflows; it does not establish certification or legal compliance.
Safety Management System (SMS) event logs, hazard mitigation records, and frontline safety assurance workflows for transit agencies.
Rolling-stock condition scoring, useful-life benchmarks (ULB), and capital asset state-of-good-repair investment planning.
Complementary paratransit corridor compliance, accessibility equipment logs, and capacity constraint monitoring.
Automated aggregation and validation for S-10 Service, R-20 Maintenance Performance, and A-30 Revenue Vehicle Inventory forms.
Note: These are standards the platform is built to support inside your workflows — obligations that fall on you as the license. They are not certifications held by us, and support in the product is not a substitute for your own counsel or compliance officer.
Generic third-party devices can connect physical operations to a named workflow through a validated interface.
J1939 CAN-bus or ruggedized vehicle tablet connector
Operator & Fleet Dispatch — Deliver turn-by-turn routing, live CAD dispatch messaging, pull-out check-in, and digital driver paddles to the operator console.
Overhead optical door sensor connector or IP camera feed
Planning & Network Design — Stream real-time boarding, alighting, and passenger load counts directly into ridership profiles and headway frequency models.
OBD-II / J1939 CAN telematics ingestion connector
Predictive Fleet Maintenance — Capture real-time engine fault codes (DTC), battery state-of-charge, coolant pressure, and odometer data for predictive failure triage.
Note: Hardware, installation, and integration are not included in the standard subscription. Additional charges apply based on the hardware selected, integration modules required, and implementation scope.
Starting at $200/mo
Service planning, dispatch orchestration, live headway control, and compliance workflows, configured around your transit fleet.
Note: AI API usage is charged separately. Clients must recharge their AI credit balance based on their usage.
Subscription scope is confirmed in consultation. One-time onboarding and optional third-party hardware are separate.
A one-time onboarding setup for your transit routes, CAD/AVL telemetry, driver rosters, and compliance workflows. Fees are starting points; final scope depends on GTFS feeds, vehicle fleet size, integrations, and deployment model.
Starting at $1,000+One-time fee
Starting at $2,500+One-time fee
Everything in Essential, plus:
Starting at $5,000+One-time fee
Everything in Plus, plus:
Run Tripqentra AI wherever your transit schedules, CAD/AVL telemetry, driver rosters and passenger files are allowed to live.
The subscription price is identical either way.
Runs in Nestack's managed cloud — nothing to provision. The fastest way to get your scheduling, CAD/AVL feeds and dispatch queues live and clearing.
The same platform deployed inside your own infrastructure — your cloud, VPC or on-prem — for transit operators and agencies with strict data mandates. Application, route and telemetry data never leave your environment, and the platform subscription stays the same.
Build the schedule-to-dispatch workflow around driver permissions, headway evaluation, exception handling, and human supervisor review.
From live GTFS schedule synchronization and paratransit intake through dynamic headway balancing and audited pull-out dispatches — one industry playbook end to end.
Transportation playbooks execute directly inside Nestack AgentCare — production agent infrastructure with audited execution traces, SOC 2 compliance, and verified transit connectors.
Transportation AI agents are catalogued on nestackagents.com. Tool names and marks belong to their respective owners.
Tripqentra AI connects to the CAD/AVL, scheduling, fare collection, GTFS-RT, telematics, and maintenance platforms your transit operation already runs — through public, documented APIs — so data moves through planning, dispatch, headway control, and compliance without manual re-keying. 18 integrations across 6 workflow groups.
Note: Tool names and marks belong to their respective owners. No endorsement or partnership implied.
Everything you need to know about pricing, CAD/AVL integrations, dispatch workflows, predictive maintenance, and operational deployment.
