Biotechnology AI agent · Commercial field

Field-Rep & Pre-Call Commercial AI Copilot

Assemble the account picture, choose from approved in-date content, draft the call plan and turn notes into records — an event or complaint found in a note is pushed to safety on receipt.

Typical delivery
4–6 weeks
Deployment
Your stack
Adverse events
Out on receipt
After launch
Agent Care

What this agent does

Prepares the call, records what came back

In

  1. 01

    Pull the account and prescriber picture from sources your data licence permits — history, access, formulary.

  2. 02

    Read the approved content set, the certification date each piece carries and what this market and channel may use.

Reason

  1. 03

    Match the call objective to material that is approved, still in date and cleared for this audience.

  2. 04

    Surface the territory's own constraints — access route, prior interactions, stated preferences and opt-outs.

  3. 05

    Draft the call plan and its discussion points, each one carrying the approved-label statement it rests on.

Decide

  1. 06

    Detect an off-label question and send it to medical information by the route your company defines.

  2. 07

    Detect an adverse event or product complaint in a note and push it to safety on receipt, ahead of the call record.

Out

  1. 08

    Return the plan, the selected material and the constraints for the representative to take or change.

  2. 09

    Turn the rep's notes into the call record, the follow-ups and the log of what was shown and sent.

Product statement

The agent assembles, selects, drafts and routes inside the approval boundaries agreed during implementation. What is said in a call, what is sent and under whose name, and every reportable transfer of value stay with the representative, their manager and compliance.

Example workflow

One call, end to end

  1. 1Call comes upA territory plan slot, an account trigger, a request from the practice or a follow-up falling due
  2. 2Account picture assembledCall history, access route, formulary position, prior interactions, consent and contact preferences, from permitted sources
  3. 3Content selectedApproved material still inside the certification date it carries, cleared for this audience, market and channel
  4. 4Call plan draftedObjective and discussion points, each traced to the approved-label statement behind it, with what belongs elsewhere named

No human action required

Stages 1 to 4 run without a person in the loop — the picture, the permitted content set and the draft plan are finished before the representative opens anything.

5DecisionSplits on whether anything here belongs to another route
Approved content, nothing to route

Reaches the representative as a call plan.

Off-label ask, safety item or spend

Leaves this path for the function that owns it.

Representative, manager and compliance

The representative reads the plan against the account they know, then makes the call under their own name — what they say in it is the company's statement, not the agent's — and sends nothing until they send it themselves.

Take the plan · Change it · Route to medical information

Called — notes returned

  1. 6Call made, notes returnedThe representative calls; notes become the call record and the follow-ups, and a safety item found in them leaves before either is written
  2. 7Outcome evaluatedLabel consistency of drafted lines, out-of-date material caught, off-label and safety routing, and what the rep rewrote by cohort

Rep changes

What a representative struck out or added before the call is counted.

What should not run autonomously

Human approval stays in control

Outside the boundary — human approval required

8 items

  • Making or drafting a claim outside the label.
    • Using or drafting unapproved or expired material.
    • Answering an off-label question.
    • Recording a spend or a transfer of value.
  • Automation boundary

    Agent acts unaided

    • ✓Assemble the account and prescriber picture from permitted sources.
    • ✓Select from material that is approved, in date and cleared.
    • ✓Surface access, prior interactions, preferences and opt-outs.
    • ✓Draft the call plan, and push an event or complaint to safety on receipt.

    Write actions run only inside the approval boundaries agreed during implementation. Sending to a prescriber is not one.

    • Sending anything to a healthcare professional.
    • Deciding an adverse event need not go to safety.
    • Contacting a prescriber who has opted out.
  • Changing the approved content set or the routing rules.

Example output

One pre-call plan, annotated

Everything the agent proposes is attached to the account it was built from and the material it selected.

Pre-call output · single planned call

Illustrative example
Call coming up
Specialist office, in person
Access on file
Restricted, prior auth
Content checked
Today, 07:40
Call plan
Ready for the rep
Confidence
89%
Held back
Two pieces, out of date

As received

The call as the territory plan has it, the access position on file, and when the content set was read.

Evidence used

  • Approved core visual aid
  • Access position, dated
  • Last call and preference

Why two pieces are held

Both are past the certification date they carry, so neither is offered nor rewritten.

What the score decides

Confidence decides how closely the rep re-reads, not whether a line is on label.

Action

Take the planChange itRoute to medical information

Value

Where AI adds value

The same four claims, placed at the point in the workflow where each one applies.

Where the value lands

Value 01 – 04

Every call in the plan

Territory plan, request or follow-up

03Account picture

Work from the territory as it is

Use the approved content set, the access position, the prior interactions and the preferences held for this account.

01Approved path

Give the hour back to the call

The picture, the permitted material and a drafted plan are ready before the representative sits down, rather than assembled across four systems the night before.

02Human review

Send the question to the right desk

An off-label ask goes to medical information and a reported event goes to safety, instead of being settled in the car park and typed up later.

04

Build an evidence trail

Retain the sources read, the material selected and its status, the plan, what the representative changed and what came back — on both paths.

Integrations

Typical integrations

Five system groups connect to the same agent. Which of them are in scope is decided in discovery.

  • Field CRM

    • Veeva CRM
    • Salesforce Life Sciences
    • IQVIA OCE
    • Territory alignment
  • Approved content

    • Vault PromoMats
    • Certification dates
    • Approved email
    • Asset stores
  • Commercial data

    • Formulary and access
    • Payer coverage
    • Licensed prescriber data
    • Claims

Agent

Field-rep & pre-call support

  • Builds the picture
  • Selects approved content
  • Routes what it may not answer
  • Safety, medical & compliance

    • Safety intake
    • Medical information
    • Transfer-of-value log
    • Consent register
  • Observability & evaluation

    • OpenTelemetry
    • Langfuse
    • Supported monitoring/evaluation sources

Integration availability depends on the client's existing systems and API access.

Agent controls

Six layers between the model and the call

Each control wraps the one inside it. A plan clears every layer before a representative reads it, and the send stays outside all six.

L6 · Outermost — last line of defence

Inward → L1 · closest to the model

L6Rollback / safe modeReturn call preparation to the field team if evaluations or production signals degrade.Roll back
L5Scope and trailReads are checked against the data licence and the opt-out list, and each read is recorded.Record
L4Representative gateThe send is the representative's own act; the agent proposes what they may choose to send.Gate
L3Route-out rulesA note is screened for off-label asks, events and complaints; a hit leaves this path first.Route out
L2Content status checkMaterial is checked for approval, date and audience as your content system reports them.Check
L1Label bindingDrafted lines are matched to approved label text; one with no match is held, and one drifting inside a matched statement is measured here.Bind
Model coreCall plan proposed — objective, discussion points, selected material and confidence
L1 – L2
Test a line on the label, a piece on its status
L3
Sends what this path may not answer elsewhere
L4 – L5
Keep the send with the rep and reads in scope
L6
Pulls automation back when signals degrade

How Nestack evaluates it

Evaluate what leaves the call, not only what goes into it.

Coverage runs the whole depth of the workflow, and every layer is cut by slice.

Surface — the plan the representative opens

  1. E1Label-consistency evaluationDoes every drafted line sit inside the approved label it names?
  2. E2Content-status evaluationWas each selected piece approved, in date and cleared for this audience?
  3. E3Safety hand-off recallDid events and complaints in returned notes reach safety, and how fast?
  4. E4Routing evaluationDid off-label asks and transfer-of-value items leave on the right route?
  5. E5Slice evaluationHow does plan quality change across specific account cohorts?
  6. E6Business outcomeWhat did the representative rewrite, and what did compliance find later?

Floor — the records and reports that must follow

Failure modes

Where each failure originates in the agent

Seven failure modes plotted against the five stages of the agent lifecycle.

Agent lifecycle

Direction of processing →

  1. 01 · Account picture

    2 modes

    • FP-01

      Opted-out prescriber planned against

      Data the licence withdrew is used to build the call.

    • FP-02

      Access position out of date

      The plan argues a formulary status that has moved.

    Stage gathers

    Call history, access, preferences and permitted data

  2. 02 · Content selection

    2 modes

    • FP-03

      Expired piece selected

      Material past its certification date reaches the plan.

    • FP-04

      Wrong market or audience

      A piece approved for another market is offered here.

    Stage selects

    Approved material still inside its certification date

  3. 03 · Plan drafting

    1 mode

    • FP-05

      Discussion point drifts off label

      A drafted line outruns the approved indication.

    Stage drafts

    The objective, the discussion points and their basis

  4. 04 · Record / hand-off

    1 mode

    • FP-06

      Event left in the commercial system

      A safety mention in a note is filed as feedback.

    Stage returns

    The call record, the follow-up and what leaves it

  5. 05 · Change / Version

    1 mode

    • FP-07

      Silent routing regression

      A rule change moves the off-label line unnoticed.

    Stage tracks

    Model, prompt, content-status and routing changes

  • Sev-1 · a duty with a clock is missed
  • Sev-2 · the company uses or says what it may not
  • Sev-3 · the plan degrades and the rep rebuilds it
See the complete Biotechnology failure-mode catalogue

Affected slices

Most of the rewriting sits in two kinds of account

Plans a representative rewrote, and plans a piece had to be pulled out of, counted by account cohort. A newly launched indication has little call history to plan from, and access positions move mid-quarter.

Slice performance — reported separately, not only in aggregate

Illustrative example
SliceFailure rateLiftLift vs. thresholdStatus
Newly launched indications4.8%3.1×Review
Accounts under an access restriction3.5%2.3×Review
Prescribers with data opt-outs2.9%1.9×Watch
Routine in-territory follow-up calls1.3%0.8×Normal

Bar: rewritten-plan lift vs. routine follow-up baseline · scale 0–4.0× · tick at the 2.0× threshold

2 of 4 slices over threshold

Evidence-linked improvement

Where a plan gets rewritten, the rule behind it moves

The cases worth having are the quiet ones — a discussion point deleted in the car park, a piece swapped for another without a word to anyone.

Improvement cycle · five stages

Switchback — the path turns at Improve and returns at Learn

  1. 01

    Detect

    Rewritten plans, held pieces or slow safety hand-offs move in one account cohort.

  2. 02

    Diagnose

    Ask the representative who rewrote it; they can usually name the wrong input.

  3. 03

    Improve

    The label check, the status rule or the routing line changes with a named approver.

  4. 04

    Verify

    Plans in that cohort are drafted again, the ones a piece was pulled from included.

  5. 05

    Learn

    Why a piece was pulled is written where the next selection has to read it.

  6. Learn → Detect

    The return edge. Labels, approved content and access positions all move under someone else's authority — the agent re-reads them on the next cycle, it does not update them.

Typical build scope

Twelve workstreams across six weeks

The build scope read against the delivery timeline. Week structure follows the six-week plan — discovery, content and permitted use, planning and routing, evaluation, integration, then production validation and handover.

Workstream

Week 1Week 2Week 3Week 4Week 5Week 6

  1. 01Workflow discovery and automation-boundary definition.Week 1
  2. 02CRM and content-system access review.Week 1, Week 2
  3. 03Approved-content status and certification map.Week 1, Week 2
  4. 04Permitted-use, consent and opt-out rules.Week 2
  5. 05Account and prescriber picture assembly.Week 2, Week 3
  6. 06Label-consistency checks on drafted lines.Week 3
  7. 07Adverse-event and complaint hand-off.Week 3, Week 4
  8. 08Off-label routing to medical information.Week 3, Week 4
  9. 09Call-plan drafting and the pre-call pack.Week 4
  10. 10Evaluation suite, routing recall and regression cases.Week 4, Week 5
  11. 11Call-record capture and follow-up write-back.Week 5, Week 6
  12. 12Observability, deployment and Agent Care handover.Week 6

12 workstreams · 6 weeks · bar shows the weeks a workstream is active — several run in parallel

Final scope and sequence confirmed in discovery

Engagement tiers

What each tier includes

Rows are the capabilities named in each tier's scope. Higher tiers include everything below them.

Capability✓ in scope · — not at this tierPilotOne product, one territoryProductionProduction CRM integrationAdvancedSeveral products / countries
Introduced at Pilot
Pre-call account and access picture✓✓✓
Approved, in-date content selection✓✓✓
Label-consistency check on drafted lines✓✓✓
Adverse-event and complaint hand-off✓✓✓
Off-label routing to medical information✓✓✓
Consent, opt-out and permitted-use scope✓✓✓
Call notes turned into the call record✓✓✓
Baseline evaluation✓✓✓
Introduced at Production
CRM, content and follow-up integration—✓✓
Observability and evaluation—✓✓
Introduced at Advanced
Multi-country and multi-product controls——✓
Build priceFrom $5,000From $8,000Custom quote
Final build price
Confirmed after discovery based on products and countries in scope, CRM and content-system integrations, call volume, routing rules, approval controls and deployment requirements.
Separate from build
Build pricing is separate from recurring Agent Care, which covers managed monitoring, evaluations, incidents and verified improvements after launch.

What we need from you

What you bring, and what we build with it

Each input maps to a piece of build scope and a week in the delivery timeline.

  1. 01Your approved content set, with the certification date each piece carries

    Approved-content status and certification map

    Week 1
  2. 02Your prescriber-data licence terms, consent register and opt-out list

    Permitted-use, consent and opt-out rules

    Week 2
  3. 03The label text each product may be discussed against

    Label-consistency checks on drafted lines

    Week 3
  4. 04Your adverse-event and product-complaint intake route, and its clock

    Hand-off out of the commercial system to safety

    Week 3
  5. 05Where an off-label question goes, and who answers it

    Off-label routing to medical information

    Week 4
  6. 06Real call plans that had to be corrected, including the near misses

    Evaluation suite, routing recall and regression cases

    Week 4
  7. 07Access to CRM, content and territory systems, and named representatives

    CRM and content integration, then supervised pre-call packs

    Weeks 5–6

Nothing else is required

Deployment, documentation and Agent Care handover are ours.

Delivery timeline

Four phases across six weeks

Phases are drawn over the weeks they actually occupy. Week 5 carries both the last evaluation work and the first supervised pre-call packs.

Phase

W1

W2

W3

W4

W5

W6

  1. DiscoveryW1
  2. BuildW2 – W3
  3. EvaluateW4 – W5
  4. Pilot & LaunchW5 – W6

Week focus

W1Territory, product and the boundary — what the agent may not do

W2Content status map, permitted use, consent and the opt-out list

W3Account picture, label checks and the two routes out

W4Call-plan drafting, routing recall and the evaluation suite

W5CRM integration, supervised pre-call packs and corrections

W6Representatives plan from the agent, then Agent Care starts

Reading the band
A bar appears only over the weeks that name its work. The content status map sits in week 2: a plan drafted out of material nobody has dated is a compliance problem, not a saving.
At the end of W6
Reps have planned real calls with it and rewritten what they did not like. The status map, the label checks and the routing rules become Agent Care's from that point.
Duration
Six-week plan shown · typical delivery 4–6 weeks depending on scope confirmed in discovery.

Next step · Biotechnology AI agent

Build a pre-call copilot around the territory your reps already work.

Show us one product, the content set your representatives work from, and how an adverse event mentioned in a call reaches your safety team today. A rep types a sentence into a note on Friday afternoon; nothing in it is commercial any more, and nobody in safety knows it exists until Monday. That sentence, and what happens to it in the next minute, is the first thing this build has to answer for.

Typical delivery
4–6 weeks
Deployment
Your commercial stack
Adverse events
Pushed to safety on receipt
After launch
Agent Care available

Nestack Agents · Field-rep & pre-call support

AGT-BT-10 · Agent Care available after launch

Build a pre-call copilot

Four questions so the call starts from your actual setup — then pick a time that suits you.

About you
Your setup

No obligation. We’ll map the workflow, name the automation boundary and tell you if an agent is the wrong answer.